Applied Crafting Technique - Light Puzzle
* The work allows user to change the pattern and the light order.
* Conductive tape on the front plate is the positive flow.
* Conductive tape on the back plate is the negative flow.
* 9 plates of 12 cm x 12 cm.
* Draw lines where the conductive tape will be placed.
* LED attached in the middle of the plate.
* Conductive tape taped on the plate.
* LED in front, one leg connected to the resistor at the back, the other leg connected to conductive tape in front.
* Resistor at the back, one leg is connected to the LED the other connected to the other tape at the back.
* First try on the light and conductive tape.
* Conductive tape taped on the plate.
* Both lights lighted up when conductive tapes touch each other.
* Stacks of plates with LED and conductive tape.
* Hanger to hang one plate to the other.
* Hanging the hanger(s) on the plate.
* One plate with 8 hangers.
No comments:
Post a Comment