Set - Up
* After soldering every cables to the walkman's board.
* Closing the lid of the walkman.
* Front view.
* Back view.
* Masking taping the cables.
* Cables that are too long are tied together and masking taped to the wall.
* Photoresistors are taped in low position.
* There are 4 photoresistors in total.
* Each walkman is connected to 2 additional speakers and 2 photoresistors.
* Creating patterns on the wall using cables.
* Walkmans placed at the back of the pillar.
* Problem occurs :
- One of the photoresistor doesn't work properly.
- Probable mistake : loose connection, mistake in connection points.
* Zul helped out solving the problem.
* One of the photoresistors works only if its partner (from the same walkman) is working (covered by shadow).
* The photoresistors work in a very short range, meaning user has to walk really close to it to trigger a change in the sound.
* Zul's idea : make a black tube to narrow down the range, so it won't take lights from everywhere.
* Try out set up.
No comments:
Post a Comment